Deve,
Definitely the "bow-tie" is the one you want. The other he is describing, I
believe, is a "torque" head.
Michael
'54 Cehvy 3100
--
The Service Quality Department
Phone (925) 372-6295
Fax (925) 215-2321
e-mail: mm@service-quality.com
website: http://www.service-quality.com
On Monday, January 29, 2001 9:14 AM, Deve Krehbiel <dkrehbiel@kscable.com>
wrote:
>Below is a conversation I had with the SnapOn Representative. They have two
>types of clutch head drivers.. the standard and then the 'G' type. I am not
>sure which one is right for our application (working on the 47-54 Chevy
>Pickups). Can anyone shed some light on this? They have pictures at
>www.snapon.com but they are not clear.
>
>Thanks!
>
>Deve
>
>---------------------
>
>Deve, I am not sure which one will suit that application.
>I will try to describe the design to you.
>The Clutch "A" type ( Exmp: SDM242 ) is more flat on the outside and bows
>out
>in the middle : -<>- <-- ( looks somewhat like this )
>Where as the "G" Model is more like a bow tie ( Exmp: SDM242G ) >-< This
>is the best I can describe this to you. I wish I could have been more help.
>Thank you...
>
>-----Original Message-----
>From: Deve Krehbiel [mailto:dkrehbiel@kscable.com]
>Sent: Monday, January 29, 2001 10:22 AM
>To: Beazley, Brian A.
>Subject: Re: Clutch Head solutions
>
>
>
>Yes I know you have clutch head drivers, but I since the pictures are not
>clear, I need to know the difference between the standard clutch and the
>'G'. I am restoring several 1950 Chevy Pickups and need the ones that are
>used for that. Hopefully you can tell me which ones I need since the
>pictures arent real clear on the pattern of the clutch head.
>
>Thanks!!
>
>Deve
>
>----- Original Message -----
>From: "Beazley, Brian A." <brian.a.beazley@snapon.com>
>Cc: <dkrehbiel@kscable.com>
>Sent: Monday, January 29, 2001 9:24 AM
>Subject: RE: Clutch Head solutions
>
>
>
>Good morning Deve, We do offer several Clutch Head bits.
>The part numbers range from SDM242 through SDM247 and SDM242G through
>SDM246G. If you click on the link listed below my name, you will enter the
>catalog where these items may be viewed. Thank you, please let me know if
>you have any other questions.
>Brian Beazley
>E-commerce Customer Service
>Snap-on Tools
>Midwest Regional Center
>877-762-7662 Ext: 6637
><mailto:brian.a.beazley@snapon.com>
><http://www.snapon.com>
>
>
>
>
>-----Original Message-----
>From: Deve Krehbiel [mailto:dkrehbiel@kscable.com]
>Sent: Thursday, January 18, 2001 10:07
>To: questions@snapon.com
>Subject: Clutch Head solutions
>
>
>
>I am working on old 1948, 49, and 50 Chevy Pickups and they use a clutch
>head screw in about 3 or 4 sizes. I am told you have these in sockets, bits
>and screwdrivers. I would like to see what you have and then probably place
>an order.
>
>Deve Krehbiel
>oletrucks is devoted to Chevy and GM trucks built between 1941
>and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|