I sometimes have to use a big gear puller, especially on the backs. I've
never had trouble with the fronts. Do the drums spin freely when you're not
pulling? If so, then they must be binding when you pull on an angle. A gear
puller will pull straight out.
Regards,
Grant S.
54 3100 (mostly all there)
54 3100 (mostly not there)
55 1st 3100 (mostly rust)
Los Angeles, CA
>
>All four drums refuse to come off. All display the same symptoms, which is
>that they seem to be hung right at the top. All will wiggle about (some
>easier than others) and the rear ones show that they are loose from the
>axle.
|