oletrucks
[Top] [All Lists]

Re: [oletrucks] Brake Drum removal on 56

To: mgr@mgrcorp.com, oletrucks@autox.team.net
Subject: Re: [oletrucks] Brake Drum removal on 56
From: Passnb4U@aol.com
Date: Fri, 30 Jun 2000 11:03:54 EDT
In a message dated 6/30/00 3:30:38 AM Pacific Daylight Time, mgr@mgrcorp.com 
writes:

> I know there was a thread on this not long ago, but it didn't address my
>  problem.
>  
>  All four drums refuse to come off. All display the same symptoms, which is
>  that they seem to be hung right at the top. All will wiggle about (some
>  easier than others) and the rear ones show that they are loose from the
>  axle.  I pulled the bearings on both front hubs but they won't slide off.
>  
>  The truck has been sitting a long time. I suspect rust and/or varmints have
>  been in the brakes. But it seems interesting that they all are stuck at the
>  top.
>  
>  I've hammered and pried till I don't dare do it any more for fear of
>  breaking something. Haven't applied heat due to grease and brake fluid
>  possibly in the sticking area.
>  
>  Does anyone know what else I can do?
>  
>  Gwyn Reedy
>  Brandon, Florida
>  mailto:mgr@mgrcorp.com


  Front ones seem like others have suggested....maybe the shoes are not 
sucked in enough...the rears get pissy dues to the axle lip sometimes...apply 
some WD-40 where the hole in the drum slide ovver the lip of the axle and 
keep wiggling it, it's apretty tight fit anyway, and any rust/paint makes it 
a tough to to pull off sometimes.

  Tap the drums with a heavy hammer...not real hard, just good solid blows to 
free things up.

Mike

<Prev in Thread] Current Thread [Next in Thread>