oletrucks
[Top] [All Lists]

Fw: [oletrucks] Subframe Width Problem

To: <oletrucks@autox.team.net>
Subject: Fw: [oletrucks] Subframe Width Problem
From: "joe" <chevy1@jps.net>
Date: Wed, 12 Apr 2000 13:29:33 -0700
Joe
http://chevy1.freeservers.com/
http://jeepster.freeservers.com/
http://50chevy.freeservers.com/
----- Original Message -----
From: joe <chevy1@jps.net>
To: Terry Stellman <STELLMAN@noex.com>
Sent: Wednesday, April 12, 2000 1:27 PM
Subject: Re: [oletrucks] Subframe Width Problem


> Terry,
>
> I pulled up my table on suspension widths and years to get the following
> information:
>
> Make..... Years..... track width front / rear
> Nova-......1968-'74, 59.8" - 59.6"
> Camaro..1976 -'80, 61.3"-60.5"
> Monte-....1978-'86, 58.5" - 58.8"
>
> As you can see their is a little over 2 1/2" difference is the track width
> of the Camaro and Monte suspension so their is a chance he's telling the
> truth!  Now we have to determine if the difference is made up in the rotor
> hub "where the lugs are located" or the overall frame width?
>
> If the swap isn't straight across then you'll need rotors, calipers,
> spindles etc because the 75-87 Malibu/Monte Carlo/ S-10: Steering box on
LF
> frame rail, front steer, 10 5/8" disc, one piece spindle.
>
> Could you supply me with the WebPages of the guy you received this
> information from so I could contact him also.
>
> Joe
> http://chevy1.freeservers.com/
> http://jeepster.freeservers.com/
> http://50chevy.freeservers.com/
> ----- Original Message -----
> From: Terry Stellman <STELLMAN@noex.com>
> To: 'joe' <chevy1@jps.net>
> Sent: Wednesday, April 12, 2000 12:35 PM
> Subject: RE: [oletrucks] Subframe Width Problem
>
>
> > Joe,
> >
> > I've been surfing the web trying to find a solution to my width problem
> and
> > I ran across a posting from a guy that said he narrowed his Nova/Camaro
> > frontend 2" by replacing the rotors with some off of a Monte Carlo.
Does
> > this sound possible?  Do you know if the rotors swap straight up or do
you
> > need spindles, calipers, rotors or is this some bad information?
Thanks.
> >
> >
> > Terry Stellman
> > 1949 3600
> > Missouri City, Texas
> >
> >
>

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>