I went with a Vintage Air unit.
Yep. It does have a temperature adjusment.
As Jim says, it is in an inconvienent place.
I plan to use a flex extention and move it to the
underdash air panel. That way it will be easier to access
One other response said you had to cut or mod the dash.
Vintage has a couple of options for an underdash vent housing.
It is about 1 1/2 inches and doesn't look half bad.
Lonnie
----- Original Message -----
From: J Forbes <jforbes@primenet.com>
To: oletrucks list <oletrucks@autox.team.net>
Sent: Tuesday, October 26, 1999 9:57 AM
Subject: RE: [oletrucks] More recommendations please
> Terry--
>
> I've done a couple Vintage Air units...they DO have a temp control
> (thermostat), but it hides on the bottom where you can't see it. Not
> very user friendly.
>
> Jim
> ------------------------------
> ORIGINAL MESSAGE:
> Date: Tue, 26 Oct 1999 07:21:19 -0500
> From: Terry Stellman <STELLMAN@noex.com>
> Subject: RE: [oletrucks] More recommendations please
>
> I looked at both units and finally went with Old Air because the Vintage
> Air
> unit has no temperature adjustment and the Old Air unit did. It's
> either
> on
> or off (you can change the fan speed).
>
>
> Terry Stellman
> 1949 3600
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|