Re: [oletrucks] Wow -- I'm making some headway now!

[WR Teto <monadnoc@wgserv.crystal-mtn.com>]

Everything I've heard recommends a pinion angle of from 1 to 3 degrees. 
And usually it's about a 3 degree tilt from front to back when you
install an engine, so that should line things up pretty close.

Wally / Templeton, MA


>      Speaking of pinion angle, I've heard one theory of "up to 6
> degrees"
> and another of "about 2 1/2 degrees" , this is the one I chose to
> accept.


oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959