In a message dated 6/19/99 6:34:01 AM Pacific Daylight Time,
jnelson@paducah.k12.ky.us writes:
<< Tom,
Quoting from my Chevrolet Accessories Installation Manual on Fog Lamps
(pn 986524):
"Locate two holes in stone guard by measuring from the
centerline of the truck 16 1/2 inches to the outer ends of the stone
guard. Measure 1 7/8 inches from the front edge of the stone guard and
scribe the centers with the 16 1/2 inch measurement. Center punch and
drill two 13/32 inch holes in stone guard."
Hope this helps.
Jeff Nelson
Paducah, KY
>>
Jeff,
Sure does help.
Thanks!
Tom
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|