Sure, i'll broadcast the URL........
My home page is:
http://www.chevytrucks.org/users/wayne/
with the oletrucks members page at:
http://www.chevytrucks.org/users/wayne/member.html
Any newer members of the list that want their truck added to this list
e-mail me off list with the photo file and i'll be glad to include it....
Wayne Osborne
>
>Oh, & I like your colection of gllerie pictures. I've seen most of them
>before & I think Wayne has many too (with names of owners); sorry forgot his
>last name & homepage URL. If he sees this he should broadcast them to you.
>
>Regards,
>Doug Pewterbaugh
>dpewter@msn.com
>Denton, TX
>49 3104 216 5-window
>-----Original Message-----
>From: Allen L. Jones <ALJ@hartcrowser.com>
>To: peter@petervolwerk.demon.nl <peter@petervolwerk.demon.nl>
>Cc: oletrucks@autox.team.net <oletrucks@autox.team.net>
>Date: Monday, June 07, 1999 8:29 PM
>Subject: Re: [oletrucks] Vacuum Advance on 235 engines
>
>
>>Peter,
>>
>>Nice ride!!! I commend you on such a beautiful truck given you must not
>have several junkyards and parts stores around you (at least ones that carry
>'58 Chev and big block parts). I especially like the "it's huge and very
>powerful" part!
>>
>>Allen
>>'50 3100
>>
>>PS Your English is just fine.
>>
>>>>> "Peter Volwerk" <peter@petervolwerk.demon.nl> 06/07/99 03:48PM >>>
>>Hello John,
>>
>>I like to tell you about the same problem I had this week, my Vacuum
>Advance
>>was leak, also the centrifugal advance wasn't good.
>>The centrifugal advance I repaired with oil and cleaning but with the
>vacuum
>>advance I had to do some real work.
>>
>>First thing I did was sawing around the house where the iron is bent
>double,
>>so I could seperated the two halve's of the house, be carefull not to saw
>to
>>deep because the diaphragm is also there.
>>When you take the two parts from each other you will notice a spring and a
>>adjustible washer on the side where you atached the hose, on the other side
>>you will find a arm that will connect inside your distributor, the
>diaphragm
>>is connected to this arm and you can removed it from the house, now you can
>>check on leaks and repair the leak with a normale tube repair you will use
>>for your bycicle.
>>The only problem now is how to atached the two halve house's to eachother,
>>well take only the metall housing parts and dril 8 hole's about 2/16" each,
>>but remember to dril as much as possible to the outher side off the house
>>because other wise you won't be able to put the screws in the hole's.
>>Now put everything back to getter and make sure the diaphragm is between
>the
>>two parts of the housing, with a small point make a hole in the diaphragm
>>where you dril the hole's and fit the two parts to getter.
>>
>>I have placed a photo on my webside for a look on how I did it because I
>>know my English isn't that good.
>>
>>I hope this will help you,
>>
>>Peter 58 3100 454 Cu Inch
>>http://www.petervolwerk.demon.nl
>>
>>----- Oorspronkelijk bericht -----
>>Van: <JWSuther1@aol.com>
>>Aan: <oletrucks@autox.team.net>
>>Verzonden: maandag 7 juni 1999 4:56
>>Onderwerp: [oletrucks] Vacuum Advance on 235 engines
>>
>>
>>> Hello Everyone - In the past I've had the Vacuum Advance go bad on my 235
>>> engine in a TF truck and have never noticed anyone on the list having
>this
>>> problem. I had no luck finding one at any of the Ole Truck Vendors or
>>NAPA
>>> in the past and always found an old one on a truck in one of the salvage
>>> yards that worked. I started carrying a spare in my "FlyAway Kit" on
>>longer
>>> trips as it sure don't run good without it.
>>> Anyone know of a source for these? All the talk about Timing 235s lately
>>> reminded me of this problem and it would sure be nice to have a new one.
>>>
>>> Best Regards - John Sutherland
>>> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>>
>>
>>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>>
>>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
>
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
---------
http://www.chevytrucks.org/users/wayne
For a quick view of oletrucks mailing list members trucks go to:
http://www.chevytrucks.org/users/wayne/member.html
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|