Antonio,
Does the casting numbers on the ouside of the block also indicate that
it is a 54? What style water pump do you have?
Mike
> -----Original Message-----
> From: Antonio R. Tijerino [mailto:antonio@innercite.com]
> Sent: Thursday, June 03, 1999 8:52 AM
> To: MIKE RAHL
> Cc: 'oletrucks'
> Subject: Re: [oletrucks] 54-235?
>
>
> Last week I took my engine to the machine shop, the machinist
> showed me
> inside the engine, inside the crankcase next to the breather
> tube there is a
> stamp mark with the actual year of the engine. My engine was a '54.
>
> Antonio,
>
> MIKE RAHL wrote:
>
> > Hello,
> > This past Sunday I pulled the motor out of my 46 1/2 ton.
> It has a 235.
> > The casting number on the motor is I214 (September 21, 1954). I was
> > under the impression that all of the 53-54 235's were of
> the older water
> > pump style where the pump rises above the block deck. On
> this motor the
> > top of the pump does not rise above the deck and is in the
> same place as
> > the 235 which is in my 56 (original motor). Does anyone have any
> > insight on this?
> > Thanks,
> >
> > Mike
> > oletrucks is devoted to Chevy and GM trucks built between
> 1941 and 1959
>
> oletrucks is devoted to Chevy and GM trucks built between
> 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|