Last week I took my engine to the machine shop, the machinist showed me
inside the engine, inside the crankcase next to the breather tube there is a
stamp mark with the actual year of the engine. My engine was a '54.
Antonio,
MIKE RAHL wrote:
> Hello,
> This past Sunday I pulled the motor out of my 46 1/2 ton. It has a 235.
> The casting number on the motor is I214 (September 21, 1954). I was
> under the impression that all of the 53-54 235's were of the older water
> pump style where the pump rises above the block deck. On this motor the
> top of the pump does not rise above the deck and is in the same place as
> the 235 which is in my 56 (original motor). Does anyone have any
> insight on this?
> Thanks,
>
> Mike
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|