Tom,
I think you already have a reply from someone who installed monoleafs on the
front - well I put them on the rear. I haven't done any major hauling , but
have undoubtedly lost some load capacity (also installed 2" lowering saddles
at the same time) so the total drop is about 4". Gas shocks from NAPA work
great. Ride is improved from stock, there is more spring compliance with
monoleafs, but the ride is not bouncy at all. I am pleased with them. Had to
do some grinding so they would fit the shackles.
Jack / Winter PArk FL
----- Original Message -----
From: Tom Burt <tburt@hirose.com>
To: 'oletrucks' <oletrucks@autox.team.net>
Sent: Tuesday, April 27, 1999 2:38 PM
Subject: [oletrucks] Monoleaf Springs
> I am considering a change to monoleaf springs and need experienced advice.
> I realize that it will lower the truck considerably and effect its load
> carrying capacity and handling.
>
> 1.) What kind of ride would I expect? Better than the stock springs or
> worse?
>
> 2.) Do I need to adapt to the existing shackles?
>
> In the present condition with stock springs, the ride is soooo rough you
> need a kidney belt!
>
> Tom B. '57 Stepside 3200
>
>
>
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|