Casey,
I have several used Rochester carbs and could probably part with a
float or a whole carb if your interested.
John '51 1/2 Ton
Minnesota
VIKINGHILL@aol.com wrote:
>
> I've decided that the ongoing problems with the carb ('55 235 in my '47-2
> Thriftmaster), I changed out the needle valve back to the original and still
> had the overflow problem, so I adjusted the float in the up position to 7/32"
> lower than the spec with hopes that this would keep the level lower than the
> top of the bowl. This slowed the filling, but didn't stop the problem. I
> now think that it is the FLOAT.... augggh! None of the FLAPS around has a
> float for the rochester "c" 1bbl. Any one know of a NAPA number or anything
> that I could use, or maybe a float out of a latter model that I could use?
>
> In short, Does anyone have a float? or does anyone know of a source?
>
> TIA
> Casey
> '47-2 "thriftmaster"
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|