oletrucks
[Top] [All Lists]

Re: [oletrucks] 235 Fan Wanted

To: "Allen L. Jones" <ALJ@hartcrowser.com>
Subject: Re: [oletrucks] 235 Fan Wanted
From: rjj0msj@ix.netcom.com (Rob J.)
Date: Thu, 04 Mar 1999 21:06:12 GMT
On Thu, 04 Mar 1999 08:10:51 -0800, you wrote:

>But do you think if I had the stock fan magnifluxed and it checked out, that 
>it would be ok?  I like the stock look.  Are there any replacement fans that 
>are "close" to stock out there?

Everything is probably relative.  I am using my stock fan (even had to put it in
a shop press to take just a "wee" bit of pitch out of the blade to get it to
fit), and it has not yet thrown a blade, but you never know when that might
happen?  It has gone across country twice and is still running strong.  I am not
disputing what jack is saying, as IF he is correct, and I have just been lucky,
then it is GREAT advice.  However, the other side of the issue is that maybe HIS
and ONLY his fan was defective?  I don't guess this solves your dilemma Allen,
but maybe it will bring out a couple of other success or failure stories, and
then maybe you can draw on the "majority"?

Rob
>
>>>> "jack halton" <safesix@worldnet.att.net> 03/03/99 06:24PM >>>
>I related this to the list a while back. The original stamped steel fan
>should be tossed and replaced with a modern fan. Mine lost a blade and took
>out the radiator, power steering pump and punched a hole in the hood. A
>6-blade alloy fan cost about 30 bucks and could have prevented this. Engine
>runs cooler too.
>
>Jack / Winter Park FL
>-----Original Message-----
>From: Hudson29@aol.com <Hudson29@aol.com>
>To: oletrucks@autox.team.net <oletrucks@autox.team.net>
>Date: Wednesday, March 03, 1999 6:19 PM
>Subject: [oletrucks] 235 Fan Wanted
>
>
>> I need a high speed fan as fitted to the 55-62 (or thereabouts) 235s for
>my
>>new engine swap project. Are there other sorts of fans that work well (and
>are
>>readily available) when swapping a later 235 into a 51 AD pickup? Anybody
>got
>>something  cool they would like to sell?
>>
>>Paul O'Neil,
>>1951 Chevrolet 3600 Pickup Project, See it at:
>>The Poor Man's Advanced Design Tech Tips Page
>>http://home.earthlink.net/~conntest47/ 
>>Fullerton, California USA
>>Hudson29@aol.com 
>>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>>
>
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>