It's been about 10 years, (so I don'r remember everything), but I used some
motors from a Fiero. I cot the ends off of the motors, which exposed the
pinion gear, then too out the crank mechanism from the 58 window regulator,
and bolted the motor on in place of the crank.works fine. used some of the
door contacts from Dakota Digital.
hope this helps.
Tom Warner
58 short fleetside
Jimmy Whitley wrote:
> test. My question is has any one upgraded to power windows in their TF
> truck. I have looked at the kits from specialty power windows. But was
> hoping to find a more inexpensive way.
> Jimmy
> doodle@flintemc.net
> http://members.flintemc.net/~doodle/index.html
> tim bell wrote:
>
> > test
> >
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|