morris
[Top] [All Lists]

Re: steel wheels for pickup

To: morris@autox.team.net
Subject: Re: steel wheels for pickup
From: w.langdell@comcast.net
Date: Tue, 07 Aug 2007 00:29:24 +0000
Dexter:  I have 3 sets of steel rims available that may help.  One is a set of 
4 Spridget "Rallye" style steel 13x5.5 rims that can be used unmodified on 
Morris drums or disks.  I also have two sets of unmodified Vega/Monza steel 
rims, one set wider than the other (13x5.5 and 13x6.5) that would need the 
center hole enlarged for Morris drum hubs.  For my stock wheels I use 
Vreidistein 165R14s that I bought from British Wire Wheels in Watsonville.  Let 
me know if you have use of any of these otherwise idle sets of rims.   ---Bill 
Langdell, Sunnyvale CA   w.langdell@comcast.net (408)730-9237

-------------- Original message -------------- 
From: Kevin Wayne Williams <kww@gte.net> 

> Undersized? Find me a single brand of 165x14 tires that the tire 
> manufacturer claims will work on those tiny rims. 145R14 is about the 
> same as the stock original, and they work fine. 
> 
> I've used 165R14s, too. I'm not going to claim that they immediately 
> explode or anything, but they do look funny mounted on such narrow rims, 
> and it violates the tire manufacturer's recommendations. 
> KWW 
> 
> Richard Feibusch wrote: 
> > Guys, 
> > 
> > 145X14s are frightfully undersized and anything up to a 165X14 will 
> > fit safely - I usually fitted 13X5.5 Chevy Vega wheels with 165X13s 
> > or 185/70X13s and these worked great and looked cool - Randolph has a 
> > set left over from some project with trim rings and hubcaps - a good 
> > alternative 
> > 
> > Best, 
> > 
> > Rick 
> > 
> > 
> >> The OE wheels are 14"x4.5'. The only modern tire that will fit 
> >> *safely* is a Kumho Power Star 758, a 145R14 tire. MiniMania used 
> >> to import and sell them. 
> >> 
> >> You can sometimes find a 14"x5.5" wheel that was used on some later 
> >> commercials. I've never succeeded. 
> >> 
> >> KWW 
> >> 
> >> Dexter Turner wrote: 
> >>> I'm looking for a set of 4 steel wheels for a '67 Morris Minor 
> >>> Pickup. Does anyone have the specifications for the OE wheels and 
> >>> tire sizes? 
> >>> 
> >>> Thanks, Dexter 

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/morris


<Prev in Thread] Current Thread [Next in Thread>