Morganeers,
I have a few questions concerning the rear axles on my Plus 4. The right
rear axle on my car was probably replaced at some time with what looks to be
a left axle. ( The axle nut turns to the rt. on the rt. hand axle) Also I
haven't been able to line up the holes on the hub and axle on either side
for a cotter key. I was told that as long as the axle nuts are snug on both
sides, as they are now, I wouldn't have a problem. If I really wanted
cotter keys installed, I was told that new holes could be drilled into
both axles. It seems to me I would run the risk of rendering both axles too
weak after drilling an additional hole in each axle, especially if I
happened to drill near or into the original hole.
Your input is welcomed.
Back into the garage,
David
|