Kat,
The drive for the speedo cable is located at the rear of the trani on the
right hand side. If you lift the cover on the trani tunnel you should find a
cut-out in the tunnel to access it. You can check out the cable and gauge by
installing the end of the cable into a drill motor. The only catch is that
you need a drill motor with a reverse since you need to turn the cable
counter-clockwise.
Good luck,
Phil Roettjer
67 +4
> -----Original Message-----
> From: KatHaus7@aol.com [SMTP:KatHaus7@aol.com]
> Sent: Sunday, August 22, 1999 5:12 PM
> To: morgans@autox.team.net
> Subject: speedometer cable
>
> Hi All,
> My speedometer is not working. The cable is connected to the back of the
> speedometer gauge, but the long cable is laying on the floorboard. I have
> searched my manuals, and can not find where this cable should be connected
> to
> make the gauge work. Any suggestions would be greatly appreciated.
>
> Thanks,
> Kat
> 67 Morgan +4 Four Seater
|