Rich,
You're right about the number under the seat being hard to read. Mine is
completely worn away (although I know the number to be B658).
Maybe I can bring it out by etching it with acid, but in the meantime I'm
curious about this wheel well number you mentioned.
Is it in the front or rear wheel well? Both wells are rather cruddy on my '62
due to numerous years of exposure. Is there a specific area I should be
excavating?
Joe DeLuca,
Sparta, NJ
'62 yellow 4/4 RHD
>> The chassis number is stamped on the cross member under your seat. Usually
>> hard to read due to the rust.
>>
>> You can also get the chassis number in a round about way as follows. Atop
>> the wheel well on the right hand side Morgan stamps the body or tub number.
>> It is easy to read. On my 4/4 Mog it consists of a "B" followed by four
>> digits. The factory can get you the chassis number from the tub number plus
>> lotsa other data such as date of manufacture, original accessories, color,
>> etc.
>>
>> Richard Cooperman
>> '67 4/4 RHD
|