Check all bullit connectors which are lose and get these soldered.
Also verify the black things where the bullits are fitting into.
Many of these will show metal fatigue.
When you have the chance get these replaced anyway.
It will prevent poor contact problems in the future.
Cheers,
Hans
1971 BGT
----- Original Message -----
From: "Maynard Hirsch" <mghirsch@netzero.net>
To: "MG" <mgs@autox.team.net>
Sent: Tuesday, July 03, 2007 7:33 PM
Subject: Re: [Mgs] New harness has arrived
> Assuming that the old harness has no value to you, don't just disconnect
> it.
> Cut off each terminal, leaving a strand of wire, and leave it connected.
> This
> way, when you are connecting the news harness, yo can easily match colors
> and
> connections.
>
> Maynard
_______________________________________________
Edit your replies
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
|