mgs
[Top] [All Lists]

Re: Engine removal - front mounts

To: MG List <mgs@autox.team.net>
Subject: Re: Engine removal - front mounts
From: Max Heim <max_heim@sbcglobal.net>
Date: Thu, 19 Oct 2006 19:58:41 -0700
It seems to me either way you do it winds up being a pain somewhere along
the line. But I think I usually have undone the biscuit mount from the
frame.


--

Max Heim
'66 MGB GHN3L76149
If you're near Mountain View, CA,
it's the primer red one with chrome wires


on 10/19/06 6:03 PM, Peter Schauss at schauss@worldnet.att.net wrote:

> I have another question about removing the engine (1980).  Do you unbolt the
> front mounts from the frame or can you leave the mounts bolted to the frame
> and unbolt them from the engine?
> 
> The latter appears to be easier, especially on the left side where the bolt
> which holds the mount to the frame is blocked by the steering column.  I am
> suspecting that leaving the mounts bolted the frame does not work because I
> have unbolted all four of the bolts which hold the mounts to the motor and
> my hoist does not move it.  (Yes, I have removed the starter.)
> 
> I would appreciate any hints or suggestions for short cuts.
> 
> Thanks,
> Peter Schauss
> 1980 MGB




<Prev in Thread] Current Thread [Next in Thread>