mgs
[Top] [All Lists]

Re: MGA rear end disconnect

To: <mgs@autox.team.net>
Subject: Re: MGA rear end disconnect
From: Barney Gaylord <barneymg@MGAguru.com>
Date: Sun, 16 Jul 2006 21:33:27 -0500
At 12:48 PM 7/16/06, Eric J Russell wrote:
>....
>Wire wheel and disc wheel axles are different, BTW.
>
>For lots of info about MGA's be sure to bookmark Barney Gaylord's 
>web page. Here's a link to info about rear axles:
>http://www.mgaguru.com/mgtech/rearaxle/ra1.htm

And if you poke around a little you myght find a picture of your problem:
http://www.mgaguru.com/abused/ab1.htm
See the third picture.

I have a spare 10 spline halfshaft for a disk wheel car.  Won't help 
if you have wire wheels.  These parts come up on eBay fairly 
often.  Or someone on this list might have what you need.  The 
halfshaft swap is pretty easy, you just need gasket and seals for the 
rear hub, and do it before dinner in the evening.

Barney Gaylord
1958 MGA with an attitude
http://MGAguru.com




<Prev in Thread] Current Thread [Next in Thread>