Re: Forwarded: hub nut

["Paul Hunt" <paul.hunt1@blueyonder.co.uk>]

3/4" drive or impact socket maybe, but I had no trouble getting a 1/2" drive
socket off the shelf that fits, which has an OD of 1.727", can't measure the
hubs at the moment.  It is the rear ones you will have trouble with of
course.

PaulH.

----- Original Message ----- 

We also know from past threads that the socket needs to be a good
quality one (r.e. Thinwall)  Cheap thick wall sockets will have to large
of an OD to fit.