Re: Poor brakes - and how to get to them

[RampantNM@aol.com]

In a message dated 12/7/2005 3:11:16 A.M. Mountain Standard Time,  
Richard.Gosling@atkinsglobal.com writes:

3 I  drilled through,
but the one closest to the wing is completely  inaccessible!  


Use a Dremel tool or a die grinder to grind the head away.  Or  if possible, 
cut a slot in the top for a screw driver.  If all else fails,  remove the wing 
first.
 
Robert  Houston 

2008 Bipartisan Bumper Sticker
"Run Hillary Run"
Demos put  it on the back bumper, Republicans on the  front......