Paul,
I used a very thin smear of RTV.
Bob
On Mon, 17 Oct 2005 15:51:03 -0400 Paul Osborne <paul@ece.rochester.edu>
writes:
> Have rebuilt a tube axle for 74 MGBGT and notice that there is no
> gasket at the outer bearing cap that bolts to the axle and holds the
>
> outer axle bearing. Should I use a sealant/form a gasket/ RTV/ or
> nothing? Looks like if nothing is there it will leak rear axle lube.
>
> Help. I do not wnat to have to take this apart due to an oversite
> on
> my part.
> thanks
> paul
> --
> Paul Osborne
> University of Rochester
> Engineering & Technical Services
> Department of Electrical and Computer Engineering
> 201 Hopeman Bldg River Campus
> Rochester, New York 14627
> 716-275-5226
> paul@ece.rochester.edu
|