They are 7/16" fine (20 or 24?). I was unable to locate this size even
though I live in the largest city in the state (Montana) and we have
some of the large hardware box stores. So I went ahead and ordered them
from a Moss reseller as part of another order so the cost was (I think)
a little under $1 apiece, not much higher than what may be the normal
hardware price. They weren't listed in the catalog at the time and still
may not be - Kelvin mentioned the part number on this list and I used
that, about six months ago I think. So you could contact him or Moss to
get the part number and order them if you cannot find them locally.
David Councill
67 BGT
72 B
dcouncill@msubillings.edu
-----Original Message-----
From: owner-mgs@autox.team.net [mailto:owner-mgs@autox.team.net] On
Behalf Of Paul T. Root
Sent: Monday, September 12, 2005 7:23 AM
To: RICHARD BOES
Cc: mgs
Subject: Re: Blocking Air Rail Ports in Head
Well, they aren't metric.
You can go to a hardware store and get 3/4" allen
head screws. 3/8" or 7/16" seems to come to mind. And
fine thread. It's been a couple years since I've done
it. Someone will know the right size. They are probably
about 80 cents each.
Also, I believe I saw that Moss carries them now. Somewhere
around $1.
Or you could go to eBay and pay $10 for the set. :-)
|