At 3:00 PM -0500 7/21/2004, Rocky Frisco wrote:
>Paul Root wrote:
>
>>Periodically, I get a wild hair about putting a polished alloy valve cover
>>on the 'Bs engine. But they don't have breathers for hooking it up to the
>>carbon canister.
>>
>>Is it possible to put a breather on one of these?
>>
>>No, I'm not going to use a vented cap.
I run an Offenhauser(SP) breather attached to my aluminum valve cover
on my A. I got it from Speedway Motors here in Lincoln, NE. I have
had no trouble with oil leakage around the inspection plates since (I
run a 5 main 1800 engine from a B)
--
Bob Shaw
Check out Shaw's Garage at http://www.mlcltd.com/shawsgarage/
My British Car is NOT leaky - it's merely marking its territory.
|