On 27/05/2004, at 12:50 PM, Eric Erickson wrote:
> On 27/05/2004, at 12:21 PM, Barney Gaylord wrote:
>
>> At 01:10 PM 5/26/04 -0700, Paul M. wrote:
>>> ....
>>> In addition to the resulting negative camber, I'd be curious to hear
>>> what people think of the value of these arms as a modification.
>>> When you lower the car with the springs, it goes negative anyway.
>>> How much negative camber is too much?
>>
>> anything other than original factory spec of zero camber will result
>> in increased tire wear.
>
> I have finally gone 1 degree negative camber
OK, I fibbed - 1.5 degrees!
Eric
'68 MGB MkII
Adelaide, South Australia
|