mgs
[Top] [All Lists]

Re: MG wouldn't start

To: bernd <bernd.vabeach@erols.com>
Subject: Re: MG wouldn't start
From: Paul Root <ptroot@iaces.com>
Date: Sun, 25 Apr 2004 19:55:19 -0500
the little braided wire that runs from the plate the points are on to 
where ever it goes?   That's the technical explaination. :-)

Paul.

te:
> ok folks, I must be loosing it, this is the story so far, gave my "B" a tune
> up, this afternoon, took the distributor out and changed points (put a little
> distributor grease on the shaft) then changed , condenser and distributor
> cap.
> Put distributor back in, tried to start the car, it wouldn't start, looked at
> all the connections, all wires connected, tried again, no start, took the
> distributor out and put my spare distributor in, car sprang to life
> immediately, took spare out put first dizzy in car again, car wouldn't  start,
> just cranks, what is missing here? with the exception of a few of my gray
> brain cells.
> Bernie





<Prev in Thread] Current Thread [Next in Thread>