I seem to remember that "copper" grease was meant to be good. This has
minute particles of copper which prevent seizing under high
pressure! What we need is a an oil & lub expert.....
At 06:38 AM 3/29/2004, Paul Hunt wrote:
>I use the same grease as for the suspension etc. Some recommend silver
>grease as some always leaks through onto the wires, but since the grease
>(the tiny bit that leaks on mine anyway) catches dust and goes black anyway
>I don't think it matters. I think the secret is more down to only smearing
>a little on the splines and the tapered seats, and not gobbing great lumps
>on.
>
>PaulH.
>
>----- Original Message -----
>From: "bernd" <bernd.vabeach@erols.com>
>To: <mgs@autox.team.net>
>Sent: Monday, March 29, 2004 3:17 PM
>Subject: spline grease
>
>
> > what is the general consensus of what type of grease to use on our wire
>wheel
> > splines, will any axle grease do?
Regards
Barrie
Barrie Robinson
barrier@bconnex.net
|