I'm going to have to take my own advice and clean the fuse block and
connections. Guess I'll look at the underside of it too. Tonight my
horn quit again, on the way to the store. At the store parking lot, I
took out and reinstalled the fuse and wiggled the wires on the block
again. So the horn works now but all my electrical gauges quit working
on the way home. Nuts!
Cheers,
CR
Lew Palmer wrote:
> I hate to be contrary, but I have found more often than not that the brass
> bits are simply riveted on to the fiber block. They work loose, start to
> corrode, and will lose contact between the male spade connector and the fuse
> holder. The repair is to solder the two together underneath the fuse block.
>
> Cheers,
> Lew Palmer
|