> You need 4 7/16" 1/2" long allen head screws
> for the head and I think it's a 1/2" bolt for
> the intake.
> John Twist, says to grease a tap to cut the
> grooves in the hole so the shavings don't
> fall into the manifold.
Why do I need to tap the intake hole? The hose from
the gulp valve attaches to an elbow fitting at the top
of the intake manifold, so can't I just cap it? Like
a thick rubber cap held on by a hose clamp or
something?
In a way, that's almost what's on there now, so why
would I have to tap it and bolt it closed?
Thanks,
=====
Paul Misencik
1971 MGB Vintage Race Project
www.sopwithracing.com
Huntersville, NC USA
www.paoloroman.com
__________________________________
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|