Also check to see if the captive nut holding the pin is secure. I've had an
aftermarket bonnet where the metal was too thin and fatigued resulting in a
tear in the metal. The pin therefore was loose and the bonnet kept popping
up.
Also, the later model B's had a smaller washer on the bottom of the pin than
the earlier models. The larger washer can be used in place of the smaller
one, and they may help on the rubber mounted B's.
Maynard Hirsch
///
/// mgs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|