> Scott,
> Strange how these threads can be timely. For the last two days I've been
> reinstalling window and latch components in the door shells of my 68 GT.
In
> this model the window must be out in order to access the outer seal -to-
> finisher clips. While the panel is off is a good time to check door
> alignment and position of top of window to upper door seal. MGB doors are
> not hard to align as they can be moved fore and aft and tilted on the
> hinges. Also, the hinges can be moved after loosening the screws and the
> nut on the back side accessed with a long extension through the splash
panel
> opening. As for window tilt-in, the bottom front and rear window glass
> channel brackets are slotted for in/out adjustment. While in there clean
> out any debris in the door bottom and lube anything that moves!
> Mike Winney
> 68 MGB GT (two weeks away from completion)
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|