The only problem is that primer won't prevent rust.
on 4/1/01 9:24 AM, Doug at dprather@centurytel.net wrote:
> I'm stripping a '65 B down for a fairly complete restoration. The car has
> about three layers of paint/fill/ bondo and I'm working one section at a
> time, using aircraft stripper, heat, and wire brushes. I just returned from
> a couple weeks out of town, and my concerns over surface rust appear to have
> come true: A light surface rust is showing up on the stripped metal.
>
> I don't suspect I'll be ready to paint the car anytime soon, so I need to
> know what I can do to protect the bare metal from rust.
>
> I'm thinking the best I can do would be to spray paint primer on when I'm
> done stripping a section and just count on stripping it again before I
> paint. Shouldn't be too hard to strip off a thin coat of cheap primer/
>
> I'd appreciate any ideas!
>
--
Max Heim
'66 MGB GHN3L76149
If you're near Mountain View, CA,
it's the red one with the silver bootlid.
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|