It is the long bolt that holds on the tappet chest cover. (Don't recall if it
is the front one or the back one...)
On Mon, 19 Mar 2001, Bill Mills wrote:
> Did I recall correctly, isn't the bolt used to hold the stock air filters on
> the SU carbbies the correct size?
>
> Bill Mills
>
> > >If I want to change the cam, do I need to pull the oil pump and
> distributor?
> >
> > No, just the distributor and the oil pump drive which is accessible from
> the top end.
> >
> > To remove the oil pump drive use a 5/16" fine thread bolt. You'll need
> about a 6" or 7" bolt, thread a nut and a lock nut up the
> > bolt about 1/2".
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|