Try going to
http://www.burlen.co.uk
and do some searching. Click on "Parts" then use the lower search text box
to search for MG Magnette - note that it IS case sensitive. I just tried it
and according to Burlen a 1959 Magnette III used AUC 901, while the
1960-1961 models used AUC 961. They are both HD4 variants. I've found this
site to be invaluable for carb model info!
Eddie
1971 Midget
----- Original Message -----
From: "Andrew B. Lundgren" <lundgren@byu.net>
To: <mgs@autox.team.net>; "josh mathews" <shrapnel15@hotmail.com>
Sent: Friday, March 09, 2001 11:55 AM
Subject: Re: info on how to fix/trooble shooting with twin su carbies ona mg
magnette farina
> I was more asking a model number... (HIF H4 etc...) The following has
> come back from the MG list:
>
> --------------
> Reply-to: Bullwinkle <yd3@nvc.net>
>
> Andrew:
>
> One carburettor book I have says the Magnette MK III (1959-1961,
> 1500 c.c) used HD4s. They don't list the specification number.
> That would be a 1 1/2 inch carb with the jet mounted to a rubber
> diaphram. It was only used in 1 1/2, 1 3/4, and 2 inch sizes.
>
> Blake
> ---------------
>
> I am not familiar with your carbs, but I can take a few stabs at it:
>
> When you say it is getting too much fuel to the engine, do you mean
> that the mixture is too rich, or do you mean that there is too much
> pressure from the fuel system?
>
> On Fri, 09 Mar 2001 16:18:48 +0800, josh mathews wrote:
>
> >hey its me Josh
> >i wrote about fixing carbies
> >well there a twin SU carbies
> >well just get back to me and thanks for replying
> >_________________________________________________________________________
> >Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
> >
> >
>
> --
> Andrew Lundgren
> lundgren@byu.net
> http://www.itwest.net/~lundgren
|