A design feature that tells you your engine is losing water by causing a
misfire. If only the temp gauge were as effective.
PaulH.
----- Original Message -----
From: R. O. Lindsay <rolindsay@dgrc.com>
To: James H. Nazarian, Ph.D. <microdoc@apk.net>
Cc: British Sportscar Center <Lawrie@britcars.com>; MG <mgs@autox.team.net>
Sent: Monday, February 19, 2001 2:45 PM
Subject: Re: Coil orientation
> "James H. Nazarian, Ph.D." wrote:
>
> > I always assumed the inverted orientation of the ignition coil also had
> > something to do with discouraging moisture from gathering in the
recessed
> > receptacle for the high tension lead. Just a thought...
> >
> > Jim
>
> You give them tooooo much credit for forethought. Remember, these are
> the same guys who put the problematic heater valve above the
distributor...
>
> Rick Lindsay
> Diamond Geoscience Research
> 5727 S. Lewis Ave., Tulsa, OK
> Voice: +1 918-747-3456
> Fax: +1 918-747-8599
|