mgs
[Top] [All Lists]

Re: Problem: Slooow Wipers

To: Scott Allen <scottinarl@hotmail.com>
Subject: Re: Problem: Slooow Wipers
From: Charley & Peggy Robinson <ccrobins@ktc.com>
Date: Fri, 19 Jan 2001 17:22:20 -0800
Hi Scott,

  What I'm hearing is that the wiper mechanism operated freely under
no-load conditions but slowed down under a load.  I could be that
there's too much resistance in the wiper wiring/switch circuits for the
motor to put out full power. First, clean all the electrical connections
to the switch and motor, including the grounds.  Then, if you didn't
already, you might check the brushes in the motor.  

  Cheers,

  CR

<Prev in Thread] Current Thread [Next in Thread>