mgs
[Top] [All Lists]

Re: needle type for K&N's

To: <Emjaxfl@aol.com>, <xirias@hol.gr>, <mgs@autox.team.net>
Subject: Re: needle type for K&N's
From: "Ptegler" <ptegler@gouldfo.com>
Date: Mon, 20 Nov 2000 21:43:58 -0500
Contact Joe Curto 718-762-SUSU
Mr. SU in the States
or Midel in Australia  http://www.sumidel.com/
Even from Australia, including shipping, a pair should cost
you more than $35.00 worst case

One of the two will be able to supply you with ANY
needle you could possibly need.

Paul Tegler      wizardz@cablespeed.com
www.teglerizer.com

----- Original Message -----
From: <Emjaxfl@aol.com>
To: <xirias@hol.gr>; <mgs@autox.team.net>
Sent: Monday, November 20, 2000 9:21 PM
Subject: Re: needle type for K&N's


> Greetings All
>
> I am running K&Ns on my 74 B. The needles are ABDs. Stock
type was AAU, I
> think. One step richer is the AAA needle. Mine runs nicely
with the needles
> set a little on the rich side and the timing advanced
slightly. If I could
> locate a set of AAA needles, it could be leaned out at
idle.
>
> See the book by Peter Burgess for a very detailed
discussion.
>
> Eric Markley
> 1974 MGB

<Prev in Thread] Current Thread [Next in Thread>