> IMO, single clutching is essential to the well-being of the synchro cones.
> You are giving them an easy life by matching the revs of the engine to the
> requirements of the new gear ratio.
If single clutching (for lack of a better term, I think I made that up)
is nice to the synchro too then what is the point of releasing & depressing
the clutch in the middle of the double clutch operation (the "double" part)?
Skye
> ----- Original Message -----
> From: Skye Poier <skye@ffwd.com>
> To: MG Nuts <mgs@autox.team.net>
> Sent: Thursday, January 27, 2000 10:35 PM
> Subject: double / single clutch
>
>
> > I'm getting pretty good at double clutching when I downshift, but I'm
> > curious, is there any benefit to single clutching?
> >
> > let's see if i've got this right:
> >
> > how normal people downshift:
> > depress clutch, downshift, release clutch
> >
> > single clutch:
> > depress clutch, shift to neutral, increase rpm, downshift, release clutch
> >
> > double clutch:
> > depress clutch, shift to neutral, release clutch, increase rpm, depress
> > clutch, downshift, release clutch
> >
> > shortshift:
> > shifting before peak rpm or revs.. "taking it easy"
> >
> > speedshift:
> > don't use the clutch at all but let off the gas
> >
> > powershift:
> > don't use the clutch and don't let off the gas
> >
> > Thanks :)
> > Skye
> >
> > --
> > 1966 MGB - GHN3L Safety Fast! __,__\__
> > The MGB Experience http://www.mgb.bc.ca/ (_o____o_)
|