Bill -
I've BTDT with my '76 B. I used the port in the center of the SU manifold
- where the gulp valve used to be. I found a brass elbow and hose fitting
at a local hardware store - which makes for a very secure and elegant
connection. It works fine.
Allen
>From: Bill Saidel <saidel@crab.rutgers.edu>
>
>I recently replaced on a 76B, the Z-S carb for a pair of HIF's with the
>requisite change in manifolds.
>
>The question is rehooking up the brake vacuum boost. I thought I'd remove
>the port from the old manifold and use the same port on one of the unused
>stoppered holes in the replacement intake manifold (assuming I can get it
>off after 25 years).
>
>Is that what is done for this modification? If not, what?
******************************************
Allen H. Bachelder =iii=<
Sinking Creek Home for Wayward MGs
49 YT, 57 ZB, 58 ZB, 65 B, 67 BGT, 73 B, 73BGT, 76 B, &...
New Castle, VA 24127
USA
540/544-7333
******************************************
|