I had the same problem...the advice was a sawzall!
I didn't have one, so spent about 3 hours with a Dremel tool(and 5 cutting
discs). It's hard to get a good angle otherwise and don't even try to
manually hacksaw it off.
I'm afraid you're probably not going to get it out otherwise.
Dan
73 B
>Now I wnat to unbolt the fron teye of the springs. Got the nut off. Am
>I going to hit the same "frozen bolt" problem that I ran into on the
>king pin bolt=bolt rusted to bush?
>
>If so, what are the suggestions, short of dynomite to get that bolt out!
>
>Thanks,
>
>Tim
|