Can anyone who has HS4 carbs on their B, go out to the garage and take a
look at them and give me some info on the following questions, please?
1. Where does the choke cable connect and how is it routed to the carbs?
Is it connected to the operating rod nearest the rear carb or front?
2. What is the choke cable attached with?
3. How many springs are attached to the choke op. rod, and how many to
the accelerator op. rod?
4. Do you have an induction heater betwen the heat shield and the intake
manifold
5. Are your muffler sections welded together or are they flanged
fittings that bolt together?
6. Final question; what thread pitch and total length are the exhaust
manifold studs?
TIA
Erik.
|