mgs
[Top] [All Lists]

Re: strip, sand, or leave

To: Carol <classycar@bigfoot.com>, jkoster@ncpi.com, mgs@Autox.Team.Net
Subject: Re: strip, sand, or leave
From: bdk <bdk@geocities.com>
Date: Fri, 09 Oct 1998 16:09:49 -0700
Dan Swett's Stripping Products
1905 6th Street
Muskegon, Michigan 49441
616/726-4319
Fax 616/727-6147

Liquid, Semi-paste, & Aerosol
All purpose paint and varnish remover

No acids, lyes, or caustics. Non-carcinogenic.

>From the MSDS (Material Safety Data Sheet), the following are the hazardous
contents:
Acetone, Methyl Ethyl Ketone, Toluene, Methanol, and MIBK.

1 gallon of liquid = $26.75
1 gallon of paste = $34.95
14 ounce aerosol = $10.95 (all as of last year)

It works great for me.......give it a try (YMMV).

Brandon

Carol wrote:

> If it's not too much trouble, I'd be interested, Brandon...
>
> Thanks...
>
> Carol
>
> At 12:58 PM 10/8/98 -0700, you wrote:
> >There are other strippers out there besides methylene chloride. I'm using a
> >product now called "Dan Swett's Stripper" which is alcohol based. It works
> well
> >on metal, wood, and fiberglass. If anyone wants further info, e-mail me and
> >I'll post the contact information.
> >
> >Brandon K.
> >
> >Bill Saidel wrote:
> >
> >> > I once stripped an entire airplane using methylene chloride stripper and
> >> > will never, ever do it again.  It was awful, nasty stuff that ate rubber
> >> > gloves for lunch and ruined more than one pair of eyeglasses.
> >>
> >>         As well as lungs, blood and other such vitals. MC in an
> >> enclosed, unventilated area is asking for trouble years down the tube as
> >> well.
> >>
> >> > -----Original Message-----
> >> > From: Carl W. French <cfrench@cybertours.com>
> >> > To: mgs@autox.team.net <mgs@autox.team.net>
> >> > Date: Thursday, October 08, 1998 6:05 AM
> >> > Subject: strip, sand, or leave
> >> >
> >> >
> >> > >Thanks for the replies on my question of last (stripping wax). It made
> >> > >me think of stripping the entire finish (or as close as possible) I have
> >> > >done alot of furniture with good success is this a reasonable jump? Is
> >> > >there a section on the web that covers that? what are some opinions on
> >> > >chem vs sanding. Thanks in advance for your thoughts.
> >> > >
> >> > >Carl F
> >> > >67B Mk1 (BRG now and forever)
> >>
> >>
> >>
> >> Bill Saidel           (609) 225-6336
> >> Dept. of Biology      (609) 225-6312 FAX
> >> Science Building      E-Mail: saidel@crab.rutgers.edu
> >> Rutgers University
> >> 315 Penn Street
> >> Camden, NJ 08102-1411
> >> For more information about my science, check
> >>       http://camden-www.rutgers.edu/~saidel/saidel.html
> >>
> >> "Sacred cows make divine hamburgers."
> >
> >
> >
> >




<Prev in Thread] Current Thread [Next in Thread>