There are other strippers out there besides methylene chloride. I'm using a
product now called "Dan Swett's Stripper" which is alcohol based. It works well
on metal, wood, and fiberglass. If anyone wants further info, e-mail me and
I'll post the contact information.
Brandon K.
Bill Saidel wrote:
> > I once stripped an entire airplane using methylene chloride stripper and
> > will never, ever do it again. It was awful, nasty stuff that ate rubber
> > gloves for lunch and ruined more than one pair of eyeglasses.
>
> As well as lungs, blood and other such vitals. MC in an
> enclosed, unventilated area is asking for trouble years down the tube as
> well.
>
> > -----Original Message-----
> > From: Carl W. French <cfrench@cybertours.com>
> > To: mgs@autox.team.net <mgs@autox.team.net>
> > Date: Thursday, October 08, 1998 6:05 AM
> > Subject: strip, sand, or leave
> >
> >
> > >Thanks for the replies on my question of last (stripping wax). It made
> > >me think of stripping the entire finish (or as close as possible) I have
> > >done alot of furniture with good success is this a reasonable jump? Is
> > >there a section on the web that covers that? what are some opinions on
> > >chem vs sanding. Thanks in advance for your thoughts.
> > >
> > >Carl F
> > >67B Mk1 (BRG now and forever)
>
>
>
> Bill Saidel (609) 225-6336
> Dept. of Biology (609) 225-6312 FAX
> Science Building E-Mail: saidel@crab.rutgers.edu
> Rutgers University
> 315 Penn Street
> Camden, NJ 08102-1411
> For more information about my science, check
> http://camden-www.rutgers.edu/~saidel/saidel.html
>
> "Sacred cows make divine hamburgers."
|