ccrobins wrote:
>
> Harlan,
>
> Not according to my Bentley manual diagrams and my experience with my
> '69, which has the electric oil press sensor. My gas and temp sensors
> read high when my stab was upside down; oil press was OK.
>
> Later.... I looked at several diagrams in the Bentley manual.
> What'll throw you is that the diagrams show the oil press guage
> connected to the "B" terminal of the stabilizer. The B side is the
> battery (or alternator) supply voltage. The "I" terminal is the
> stabilized output, only goes to the temp and gas guages.
>
> Charley
In confirmation, the factory workshop manual does indeed show a green going to
the
oil gauge and light green/green going to the other two. The Haynes shows one
wire
going to all three gauges, but it changes from light green/green to green when
it
goes from the temp to the oil, and back again wheh it goes fron the oil to the
fuel. Obviously a mistake.
PaulH.
|