AHA!
I had noticed, when playing behind my dash, that my voltage stabilizer was
somewhat loose. You could wiggle the thing up and down on it's mounting
screw. I didn't tighten it because I was out of time, but I will when I get
home. I seem to remember a thread about the angle that the stabilizer
should hang at - anyone remember seeing this?
Thanks again!
Michael S. Lishego
http://www.geocities.com/MotorCity/Speedway/3706/
If none of them are working
>but the tach, heater fan etc are then the stabiliser, or its connections,
is probably
>the culprit. The stabiliser has 12v in (green, fused ignition) and light
green/green
>out. The stabiliser itself has to be bolted to a good ground to supply the
correct
>voltage.
>
>PaulH.
>
>
>
|