Seems to me that it takes 4 quarts. You may have the wrong dip
stick. I would fill it to the recommend level (including filter) then mark
the dip stick with a hack saw. That way you will know what the real
reading is with a full oil pan.
...Art
On Sat, 13 Jun 1998, Trevor Boicey wrote:
> How much oil should it take to get an 18V engine up to
> full after draining whatever will drain out of the sump?
>
> My B seems to read HORRIBLY overful even with just a couple
> of liters of oil. Do I have the wrong dipstick? I am kind
> of afraid to run it where the dipstick says.
>
> To verify, the dipstick has about the last four inches
> readable, with the low notch about an inch from the end, and
> the max notches about a half inch further up.
>
> (for these to make sense view in monospace)
>
> __________________________________
> (_____|___|________________________|XXXXXXXXXXXXXXXXXXX
>
> M M
> I A
> N X
>
> ..is the oil really supposed to be kept that low? I haven't
> tried it but I feel like I'd get it there with maybe a liter
> of oil.
>
> --
> Trevor Boicey, Ottawa, Canada.
> tboicey@brit.ca, http://www.brit.ca/~tboicey/
> [ Seeking some miscellaneous MG parts, see the list on the web page... ]
>
|