I use a glue syringe available at most wood working stores. It
takes a while but works fine.
...Art
On 18 Nov 1997, A. B. Bonds wrote:
> In <19971118.093209.17775.8.MGBOB@juno.com>, ROBERT G. HOWARD wrote:
>
> > If you need to replenish gear oil on a car that lacks the grease
> >fitting, it's necessary to remove the Yoke Cover Plate, its shims, the
> >yoke inside, the spring, the damper pad and then to pour in the oil.
>
> You can also (much more easily) cadge a 50 cc syringe and a short
> length of tubing and slip the juice in under the rubber bellows. Just
> loosen the clamp holding the rack side on.
>
> A. B. Bonds
>
>
|