At 01:18 PM 9/17/96 -0400, Jeremy DuBois wrote:
>
> I *FINALLY* got my MGB back from the bodyshop this morning ...
> Anyway, before I start to put things back on the bodyshell, I want
> to get some rust protection stuff into the inner sills and between
> body panels and such. I know Waxoyl is what everybody talks about
> and advertises, but are there any other solutions?
Jeremy,
I've been using POR-15 on my Bricklin and Spitfire any place that
is difficult to get to and that might hold moisture. On the
Bricklin I've painted the entire chassis inside and out with POR.
On the Spit, I stripped the firewall, floor boards, and brushed
POR on them. I also cut open a hole in the front of the rocker
panels, taped up the drain holes, and swabbed POR inside the
rockers. Also painted the under inside of all four wheel wells
with it since it resists chipping and scratching.
John
John T. Blair WA4OHZ email: jblair@exis.net
Va. Beach, Va Phone: (757) 495-8229
48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V
75 Bricklin SV1 77 Spitfire
The one with the most toys, wins!
|